XTAR VC8 USB charger for up to 8 batteries

XTAR offers sufficient loading bays and flexibility with the VC8. The VC8 can charge a wide range of Li-ion, NiMH and NiCd batteries including sizes 20700 and 21700 in PCB guns version. XTAR is the combination of principle, technological progress and responsibility for safety and environmental protection. The charger is suitable for both beginners and advanced users who want to learn more than "full" or "empty" about their batteries.

Determining the actual discharge capacity, discharging the batteries to the rated voltage to conserve batteries for longer storage, charging 20700 and 21700 batteries in PCB-protected version or installed QC processor to achieve full total power of 4A (only with QC USB power supply) are some key arguments for the XTAR VC8, in addition to the revised elegant display and the robust USB C input.

Compatible with all 5V USB power supplies and USB car adapters, input voltage and charging current is intelligently identified and adapted. A special feature of the VC series is the manual charge current setting (3A / 2A / 1A / 0.5A or 0.25A) the XTAR VC8 can detect, display and charge Ni-MH and Li-ion batteries at the same time. The large clear display shows: charging current, battery voltage, battery type, charged or after set cycle the discharged capacity in mAh of all battery bays.

Technical data:

• Reverse polarity protection and short-circuit protection circuit
• Power supply via USB cable (USB-A to USB-C included)
• 0 V Activation function
• QC3.0 protocol allows fast loading (3A x 1)
• Charging stop at 4.2 volts
• Automatic detection of battery cells
• Maintenance charge idle at a rate of self-discharge
• Three-stage charging (TC, CC, CV)
• IC Temperature Monitoring System
• clear LCD screen with real-time values
• Voltage-dependent switching on and off of the charging process
• Input: QC3.0 (5V-2A / 9V-2A)
• Constant current: 3A x 1 / 2A x 2 / 1A x 4 / 0.5A x 8
• Constant charging voltage: 4.2 ± 0.05 V
• Maximum setting Charging current: 2 x 3A (bay 1 and 8 only), 8 x 2A, 8 x 1A, 8 x 0.5A or 8 x 0.25A
• Additional function: Shaft 1 to 4 additionalgrading mode (battery evaluation) and storing mode (maintenance charge)

The following types of batteries can be charged::

• 3.6V/3.7V Li-Ion/IMR/INR/ICR: 10440/14500/14650/16340/17500/17670/18350/18490/18500/18650/18700/20700/21700/22650/25500/26650
• 1.2V Ni-MH/Ni-CD, AAAA/ AAA/ A/a/ SC /C
• Can charge protected 20700/21700 battery cells

Dimensions/weight:

• Weight: 350g
• Size 194 mm x 134 mm x 34 mm

Delivery:

• XTAR VC8 USB Charger
• USB-A to USB-C cable
• Operating instructions
• Bag/bag for storage
• Power supply / power plug optionally available (not included!)

Safety instructions: Charge only 3.7 or 3.6 V Li-ion batteries! Sicherheitshinweise: Device is for home use, protect from water and moisture! Disassembly and modification are strictly prohibited! Pay attention to proper polarity when used!

Power plug / power supply can also be purchased here in the shop: Power plug / Power supply to buy