XTAR PB2 Li-Ion USB Charger and Power Bank

The @7K5I0 PB2 is an optimal combination of charger and power bank. With its 2-bay system, the @4R8J2 PB2 18650 battery cells can be charged and used as a power bank. Due to its small dimensions, the PB2 is an ideal companion for on the go. A special feature is the built-in balancer, which ensures that the two batteries are always used simultaneously, both when charging and discharging. When used as a power bank, an output current of up to 2.1 amperes is available - this is also sufficient for supplying power-hungry devices. With two 18650 cells, a maximum capacity of 7000mAh can currently be achieved. The rapid change of the batteries allows the replacement of the cells as soon as they are consumed (aged). Or you can increase the memory on the go by adding cells. The magnetically fixed cover protects the batteries during transport, but still allows quick and convenient access to the inserted batteries. The PB2 charger charges up to two 18650 battery cells simultaneously with up to 1A charging current. With a inserted battery cell, the charge with 2A is possible. The built-in Powerpath function allows the inserted batteries and a connected mobile device to charge at the same time

Technical data:

• 2 bays for balancing charging of one or two 18650 batteries simultaneously
• Reverse polarity protection and short-circuit protection circuit
• Power supply via USB cable 5V 2.1A
• Maintenance charge idle at a rate of self-discharge
• Two-stage charging (CC, CV)
• IC Temperature Monitoring System
• Powerpath function: A inserted battery and a mobile device connected via USB can be charged at the same time
• Voltage-dependent switching on and off of the charging process
• Input: DC 5V 2.1A
• Maximum charging current 1x 2A for one battery or 2x 1A when charging two batteries
• Constant charging current: 1000 mA ± 10% mA and 2000 mA
• Constant charging voltage: 4.2 ± 0.05 V

Use as a power bank: :

• 5V to max. 2.1A output current - also for charging demanding mobile devices away from mains power
• for two batteries 18650 (ICR, INR, IMR)
• allows you to choose your own batteries
• Energy efficiency up to 92%, the stored energy actually arrives at your device to be charged
• The magnetic cover protects the batteries when used as a power bank and during transport, but allows convenient access to the inserted batteries at any time

The following Li-Ion battery types can be charged::

• Li-ION / IMR / INR / ICR 18650
• 3.6V and 3.7V Li-ion batteries

Dimensions/weight:

• Weight: 55g
• Size 110 x 51 x 24 mm

Delivery:

• @5J9H9 PB2 charger and power bank
• USB Cable
• Operating instructions
• Bag/bag for storage
• Power supply / power plug optionally available (not included!)

Safety instructions: Charge only 3.7 or 3.6 V Li-ion batteries! Sicherheitshinweise: Device is for home use, protect from water and moisture! Disassembly and modification are strictly prohibited! Pay attention to proper polarity when used!

Power plug / power supply can also be purchased here in the shop: Power plug / Power supply to buy