Vapefly Kriemhild Kit Mod battery carrier with evaporator

Kriemhild Kit from Vapefly - developed by the German 103 – a group of passionate steamers and tinkerers around the Youtuber Martin Hartkopf aka Dampfwolke7 – and built by Vapefly , a kit with battery carrier and tank evaporator for evaporator heads of the extra class was created. In addition to the top processing of the stainless steel surface and the sublime look, Kriemhild impresses with a 5 ml tank volume and a Slide Topfill system with parental control. The battery carrier has a power of up to 200 watts.

Inside Kriemhild, various evaporator heads are used to choose from. Modern evaporator heads are used here with impressive taste and steam development. You can choose from mesh heads made of Ni80 or Kantahl.

The Vapefly Kriemhild battery carrier is powered by either two 18650s, 20700s or 21700 batteries (batteries not included) that can be conveniently charged via the integrated micro-USB port.

The integrated 1.33-inch TFT display allows you to conveniently read and monitor all relevant parameters and settings. Thanks to the high-quality electronics installed, the Vapefly Kriemhild battery carrier can be fired at lightning speed within 0.01 seconds. The electronics also allow the battery carrier to work in VW, TC and Curve mode.

Highlights of the Vapefly Kriemhild Kit Mod with evaporator:

• 5 Watts - 200 Watts
• electronically regulated
• available modes like VW /TC/Curve/Bypass mode
• Works with 2x 21700, 2x 20700 or 2x 18650 with adapter (included) batteries
• prefabricated evaporator heads (Mesh Ni80)
• 5 ml tank volume
• Slide Topfill System with Parental Controls
• infinitely adjustable bottom airflow

Technical data Battery carrier:

• Dimensions: 91 x 47.5 x 38.6 mm
• Connection: spring-loaded 510s
• How it works: electronically regulated
• Output power: 5 watts - 200 watts
• Evaporator profile: up to 32.5 mm
• Display: 1.33-inch TFT
• Resistance range: Standard: 0.02 Ohm - 3.0 Ohm
• Temperature control:100°C - 315°C (with Fahrenheit mode)
• Output voltage: 0 V - 9 V
• Output current: max. 40 A
• Available modes: VW / TC / Curve / Bypass
• Safety: e.g. overheating, overvoltage, deep discharge, reverse polarity protection
• Compatible batteries: 2x 18650 with adapter (not included), 2x 21700/20700er (not included)
• Degassing holes: yes
• Shop: Micro-USB port (Type-C), fitrough-capable, fast chargeable with 5V and 3 A or 2 A
• Material: Zinc alloy
• Serial number: no
• Weight: 157 g (without batteries)

Technical data Tank / evaporator:

• Dimensions: Diameter 26 mm, height 55.5 mm
• Connection: 510s
• Capacity Tank: 5 ml
• DripTip Connector: 810
• DripTip: 810 Delrin
• Draught regulation: infinitely adjustable bottom airflow
• Filling: Topfill system with parental controls
• Available evaporator heads: Evaporator heads with 0.15 Ohm (Triple Mesh Ni80), 0.2 Ohm (Single Mesh Ni80), 0.2 Ohm (Dual Mesh KA1)
• Material: Stainless steel, glass, Delrin
• Weight: 82g

Delivery:

• 1x Vapefly Kriemhild Mod Battery Carrier
• 1x Vapefly Kriemhild evaporator / tank
• 1x Replacement glass
• 1x Vapefly evaporator head 0.15 Ohm already installed
• 1x Vapefly evaporator head 0.2 ohms
• 1x Spare parts with replacement seals
• 1x MicroUSB Cable (Type-C)
• 2x 18650 Adapter
• 2x USB Silicone Cover
• 1x User Manual

Safety instructions: Lithium cells may only be operated with protective electronics! In case of incorrect handling or short circuit, this can lead to fire development or explosion! Damaged battery cells must not be reused under any circumstances!

Please note: The Li-ION battery cells 18650, 20700 or 21700 for the Vapefly Kriemhild Mod battery carriers are not included and can be purchased separately in our shop. Battery cells in the shop