Items of the brand Vapefly

The Vapefly Kanthal KA1 winding wire with 0.5 mm diameter is for self-winders for the production of own coils.

The Vapefly Kanthal KA1 winding wire with 0.4 mm diameter is for self-winders for the production of own coils.

The Vapefly NiCr Ni80 winding wire with 0.5 mm diameter is designed for self-winders for the production of its own coils.

The Vapefly NiCr Ni80 winding wire with 0.32 mm diameter is for self-winders for the production of own coils.

The Vapefly Kanthal KA1 winding wire with 0.32 mm diameter is for self-winders for the production of own coils.

The Vapefly NiCr Ni80 winding wire with 0.4 mm diameter is designed for self-winders for the production of its own coils.

The Vapefly 48 Pre-made 8 in 1 Coil Box is a collection of high quality Kanthal A1 Prebuild Coils. In this collection there are 8 different types of windings (each 6 pieces per variety/winding).

The Vapefly 810 Drip Tip / Mouthpiece Brunhilde Series are high quality Drip Tips. With their design, the Drip Tips of the Vapefly Brunhilde Series promise a pleasant lip feeling when steaming. Also visually, the Drip Tips from Vapefly are very classy and enable different colour combinations, e.g. for Vapefly Brunhilde RTA evaporators. The Drip Tips of...

Brunhilde Bloody Limited Edition by Vapefly - developed by the German 103 – a group of passionate steamers and tinkerers around the Youtuber Martin Hartkopf aka Dampfwolke7 – and built by Vapefly , a low-cost Topcoil self-encominent evaporator of the highest class was created. In addition to the top workmanship of the stainless steel surface and the...

Brunhilde MTL from Vapefly - developed by the German 103 – a group of passionate steamers and tinkerers around the Youtuber Martin Hartkopf aka Dampfwolke7 – and built by Vapefly , a low-cost Topcoil self-encominent evaporator of the highest class was created. In addition to the top workmanship of the stainless steel surface and the sublime look,...

Brunhilde MTL from Vapefly - developed by the German 103 – a group of passionate steamers and tinkerers around the Youtuber Martin Hartkopf aka Dampfwolke7 – and built by Vapefly , a low-cost Topcoil self-encominent evaporator of the highest class was created. In addition to the top workmanship of the stainless steel surface and the sublime look,...

Vapefly Brunhilde RTA - Original replacement stainless steel wicks for the Vapefly Brunhilde RTA evaporator.

Brunhilde von Vapefly - developed by the German 103 – a group of passionate steamers and tinkerers around the Youtuber Martin Hartkopf aka Dampfwolke7 – and built by Vapefly , a low-cost Topcoil self-winding evaporator of the extra class was created. In addition to the top workmanship of the stainless steel surface and the sublime look, Brunhilde...

Brunhilde von Vapefly - developed by the German 103 – a group of passionate steamers and tinkerers around the Youtuber Martin Hartkopf aka Dampfwolke7 – and built by Vapefly , a low-cost Topcoil self-winding evaporator of the extra class was created. In addition to the top workmanship of the stainless steel surface and the sublime look, Brunhilde New...

Core from Vapefly - developed by the German 103 – a group of passionate steamers and tinkerers around the Youtuber Martin Hartkopf aka Dampfwolke7 – and built by Vapefly , a low-cost self-winding evaporator of the extra class was created. In addition to the top workmanship of the stainless steel surface and the sublime look, the Core from Vapefly...

Core from Vapefly - developed by the German 103 – a group of passionate steamers and tinkerers around the Youtuber Martin Hartkopf aka Dampfwolke7 – and built by Vapefly , a low-cost self-winding evaporator of the extra class was created. In addition to the top workmanship of the stainless steel surface and the sublime look, the Core from Vapefly...

The Vapefly Cotton Clouds wadding has been specially developed for steamers and provides a great taste.

The Vapefly Firebolt Cotton wadding has been specially developed for steamers and provides a great taste.

With the Vapelfy Galaxies 30W Kit, you can expect a high-class, pocket-sized set. With a height of just 93 mm, you can stow and transport the kit perfectly. This is one of the smallest IP67-certified battery mods. It is accordingly shockproof and well protected against dust and temporary immersion in water up to 1 meter deep.

Matching atomizer heads for the Jester X pod system from Vapefly.

With the Jester X, Vapefly presents a stylish, powerful and easy-to-use pod kit that gets its power from a single 18650 battery (not included) and thus brings it to a maximum output power of 80 watts. The workmanship is of high quality and convincing and the design is extremely modern and appealing.

With the Jester X, Vapefly presents a stylish, powerful and easy-to-use pod kit that gets its power from a single 18650 battery (not included) and thus brings it to a maximum output power of 80 watts. The workmanship is of high quality and convincing and the design is extremely modern and appealing.

With the RDTA Pod Top Coiler RBA for the Jester X from Vapefly, the pod system can easily be provided with its own winding. The Vapefly Jester X RDTA RBA offers space for single coils and mesh and also has a flexibly adjustable airflow control. The 4.0 ml is refilled using a side-fill system.

With the Kriemhild 2 in the Peace version, Vapefly presents the successor to the popular Kriemhild vaporizer, which comes with one or two improvements and a plus in innovation. With its diameter of 25 mm and its filling volume of 4.0 to 5.0 ml - depending on the glass used - the Kriemhild 2 atomizer in the Peace version is the perfect companion for a...

As a collaboration between German 103 and Vapefly , a chic battery carrier called Kriemhild was created. The Vapefly Kriemhild battery carrier is a modern and powerfulmod with up to 200 watts of power, which convinces with a high-quality workmanship and very well coordinated materials. Its surface is refined for an even better feel - so the Vapefly...

Kriemhild Kit Kupfer Edition by Vapefly - developed by the German 103 – a group of passionate steamers and tinkerers around the Youtuber Martin Hartkopf aka Dampfwolke7 – and built by Vapefly , a kit with battery carrier and tank evaporator for evaporator heads of the extra class was created. In addition to the top processing of the stainless steel...

Kriemhild Kit from Vapefly - developed by the German 103 – a group of passionate steamers and tinkerers around the Youtuber Martin Hartkopf aka Dampfwolke7 – and built by Vapefly , a kit with battery carrier and tank evaporator for evaporator heads of the extra class was created. In addition to the top processing of the stainless steel surface and the...

The Kriemhild Rebuildable Mesh Coil Set comes from Vapefly , suitable for the Vapefly Kriemhild evaporator set and the Vapefly Kriemhild e-cigarette set. With this Mesh Coil Set, Vapefly offers you the opportunity to create your own mesh head for your Kriemhild evaporator and steam with it.

The matching mesh and cotton strips for the Vapefly Kriemhild RMC RBA. With the Kriemhild RMC Wire & Cotton Kit you can wrap your Vapefly Kriemhild RMC RBA 10 times. Protect the environment and your wallet.

Replacement of evaporator heads for Vapefly Kriemhild tank. These are used directly into the tank of the Vapefly Kriemhild Tank. The mesh coils are designed for DL and are available in 3 versions.